EVVA 4KS Restricted Key System Installation for Commercial Facilities in Artarmon

What was the problem?

A commercial facility in Artarmon required a restricted key system across 500 doors, with a keying hierarchy structured to control access by role and prevent unauthorised key duplication. The 500-door footprint placed the project beyond the combination capacity of all standard restricted key profiles available in the Australian market.

Managing access across 500 doors creates a specific key control problem. Any system registered to this facility needed a combination pool deep enough to support a multi-level master key schedule without overlap between access levels. Standard restricted key profiles offer combination pools in the thousands. A facility of this scale requires a system capable of generating combinations in the billions to maintain clean separation between a grand master, master, sub-master, and site key level simultaneously.

What did we find on site?

A door survey across the facility identified 500 doors fitted with locks of varying types, each requiring a purpose-built cylinder matched to the existing hardware. The variation in lock types across the site meant every cylinder had to be individually specified before manufacture could begin.

Standard restricted key systems designed for smaller commercial installations operate on profiles with combination pools that are exhausted well before 500-door coverage. Beyond combination depth, the lock-type variation across the facility ruled out any off-the-shelf cylinder solution. Each door required a cylinder built to that door's specific lock format, keyed into the broader restricted system during manufacture.

What did we install?

We installed 500 EVVA 4KS restricted cylinders across the facility, each built in our workshop to match the individual lock type on each door, and cut over 100 EVVA 4KS restricted keys for distribution to staff across the required access levels. The full keying schedule was designed and verified in Promaster software before any cylinders were manufactured.

The EVVA 4KS cylinder operates on 4-curve slider technology, where sliders are actively driven by the key's profile curves rather than being spring-loaded. This mechanism generates up to 133 billion unique key combinations and supports a grand master, master, sub-master, and individual key level within a single registered system. All 500 cylinders and all keys were tested in the Macquarie workshop before the installation team returned to the Artarmon facility for final fitting and handover testing.

Why did we choose this solution?

The EVVA 4KS was selected because its 4-curve slider technology generates up to 133 billion key combinations, giving the system enough depth to support a grand master, master, sub-master, and site key level across all 500 doors without overlap. No alternative restricted key profile currently available in the Australian market offers a combination pool large enough to maintain clean separation between access levels at this scale.

Three further characteristics confirmed the selection. The springless slider mechanism performs without degradation in dusty, dirty, or high-traffic environments, which is directly relevant to commercial facilities with warehouse or plant areas. The reversible EVVA 4KS key eliminates orientation errors at high-use entry points. SL3 certification means the cylinder is rated to resist picking, drilling, and key bumping to the highest commercial standard available in a mechanical restricted system.

What was the result?

The facility now operates under a single EVVA 4KS restricted key hierarchy across all 500 doors, with access controlled by role at the grand master, master, sub-master, and site key level. Key duplication requires written authorisation from the registered system holder, preventing unauthorised copies from entering circulation at any point in the facility's operation.

All cylinders and keys were delivered with a complete key register and system documentation at handover, giving facility management a verified record of every key issued and its access level within the hierarchy. The EVVA 4KS system is scalable: if the facility expands or access levels need restructuring, additional cylinders and keys can be added to the existing registered system without replacing existing hardware.

About the site

Artarmon sits within the Lane Cove LGA on Sydney's Lower North Shore, bounded by Chatswood to the north-west, St Leonards to the east, and Willoughby to the south. The suburb contains a high concentration of commercial office buildings and light industrial premises, with many facilities managing large workforces, contractor rotations, and multi-tenancy arrangements across multi-storey or multi-building sites. Facilities of this character consistently require key control systems that scale beyond what standard commercial restricted profiles can support.

Access control complexity at large Artarmon commercial sites increases with workforce size and the need to maintain simultaneous access levels for permanent staff, contract workers, and management. Jobs of this type fall under our Restricted Key Systems in Sydney's North Shore service, which covers system selection, Promaster keying schedule design, cylinder manufacture, and ongoing key management for large-footprint commercial facilities across Locksmith Services Artarmon and the broader Lane Cove LGA.

Need a restricted key system for your facility?

Commercial facilities with 50 or more doors, multi-level access requirements, or a workforce requiring role-based key control are candidates for a restricted key system of this type. Macquarie Locksmiths designs, builds, and installs EVVA 4KS restricted key systems for commercial facilities across the North Shore, Northern Suburbs, Hills District, Inner West, and Parramatta.

See our reviews and location on Google Maps:

Contact our team